| |
| Cleaners (detergents) |
| Aerodet |  |  | |
| Aerodet is a liquid detergent for aircraft engines, wheels and brakes. It can be used in immersion, steam cleaning and in ultrasonic cleaning units. It can also be applied by foam, spray or by hand. | |
| Tergit | | | |
| Tergit is an all purpose liquid detergent for exterior aircraft cleaning. It can be applied by foam, spray or hand application. Tergit is also an excellent aviation all-purpose cleaner that can be used to clean thrust reversers, wheels, landing gear, and wheel wells. | |
| Cleaners (degreasers) |
| DG-Kleen | | | |
| DG-Kleen is a blend of surfactants and penetrants used as a pre-cleaner or as an actual cleaner in spray-wash cabinets. It can replace traditional chlorinated vapour de-greasing. It contains low surfactants which aid in low foaming when used in a spray application and are biodegradable. It is non flammable and does not contain terpenes, cresols, or chrome derivatives. It’s free of phosphates and nitrites. | |
| Evasol | | | |
| Evasol rapidly cuts through grease and grime to provide fast and easy cleaning of surfaces made from glass, chrome, vinyl, tile, porcelain, or stainless steel. Evasol is to be sprayed on and wiped off without leaving streaks. It has a pleasant odour and does not contain methanol, ketones, or aromatic solvents. | |
| HDL-370 | | | |
| HDL-370 is a liquid multi-metal safe degreaser. It is intended for use at room temperature and designed to emulsify grease and oil instead of expelling them to the surface of the solution. Does not contain petroleum distillates and is non-chlorinated. | |
| HDP-2862 | | | |
| HDP-2862 is a hot tank immersion cleaner for use in removing grease, oil, and other shop soils from ferrous metal parts. It is specially formulated fro pre-cleaning ferrous metal parts before plating, phosphatizing, pickling, de-rusting and de-scaling operations. | |
| MagKleen-4 | | | |
| MagKleen 4 is a solvent blend intended for use by spray or immersion, to remove oil and grease from bare or painted surfaces. MagKleen 4 is safe on all metals and has a pleasant odour. MagKleen 4 can be sprayed, brushed, or parts can be immersed. | |
| Soluwax | | | |
| Soluwax is a blend of surfactants and penetrants used as an immersion cleaner. It is used as part of the aqueous wax dissolving process or an aqueous degreasing process that replaces vapour de-greasing and the use of chlorinated solvents. Soluwax is also used in the overall process of wheels and brakes. | |
| Synclair A/C | | |  |
| Synclair A/C is a biodegradable cleaner used in foam guns, spraying machines, hand application or dipping. It is free from petroleum solvents and is intended for the treatment of aircraft and helicopter exteriors. | |
| Synclair A2gel | | | |
| Synclair A2gel is a gel format offering increased adherence for vertical cleaning applications such as landing gear. Cleaner designed for fast cleaning of air vehicles, fuselage, landing gear and wheels bays. | |
| Cleaners/Surface preparation (solvents) |
| Diestone DLS | | | |
| The Diestone DLS Solvent has been specially designed as a high flash point and low VOC replacement for MEK, MPK, Acetone and Toluene. It is safe on all metals, has ahigh flashpoint and is non-photo-chemically reactive. It is non-chlorinated and does not contain ketones or aromatic solvents. It also has a low odour for operators convenience. Diestone MSK will evaporate completely in a well ventilated area. | |
| Diestone HFP | | | |
| The Diestone HFP solvent has been specifically designed as a high flash point and low VOC replacement for MEK, MPK, Acetone and Toluene. Diestone HFP is a solvent composition with controlled volatility and weak odour. It is free from chlorinated hydrocarbons and is used as a cleaning agent. The product provides maximum security: it does not contain any teratogenic or carcinogenic components, toluene or ethylene glycol ethers. | |
| Diestone MSK | | | |
| The Diestone MSK Solvent has been specially designed as a high flash point and low VOC replacement for MEK, MPK, Acetone and Toluene. It is safe on all metals, has a high flashpoint and is non-photo-chemically reactive. It is non-chlorinated and does not contain ketones or aromatic solvents. It also has a low odour for operators’ convenience. Diestone MSK will evaporate completely in a well ventilated area. Diestone MSK is a solvent intended for use by spray, aerosol, wipe on- wipe off or immersion to remove oil, grease, and protective films from bare or painted surfaces. | |
| Diestone MTK | | | |
| Diestone MTK is a solvent blend intended for use by spray or immersion, to remove oil, grease, and protective films from bare or painted surfaces. This colorless solvent blend has a low viscosity which is meant as a wipe on/wipe off application. It can also be used a degreasing solvent and be sprayed on and wiped off. Diestone MTK can also be used by immersion. Diestone MTK is safe on all metals. This fast acting solvent will not affect painted or plastic coated metal surfaces. | |
| SAT WIPES® Diestone DLS | | | |
| The Diestone DLS saturated wipes have been specifically developed as a highly effective and cost efficient method to prepare surfaces while greatly reducing solvent emissions, solid waste and worker exposure to harsh chemicals. The SATWipes® consist of pre-impregnated tissues packaged in a convenient self-closing and reusable canister. The container design prevents the wipes from drying out and promotes a safer working environment. | |
| SAT WIPES® Diestone HFP | | | |
| The Diestone HFP saturated wipes have been specifically developed as a highly effective and cost efficient method to prepare surfaces while greatly reducing solvent emissions, solid waste and worker exposure to harsh chemicals. The SATWipes® consist of pre-impregnated tissues packaged in a convenient self-closing and reusable canister. The container design prevents the wipes from drying out and promotes a safer working environment. | |
| SAT WIPES® Diestone M-SK | | | |
| The Diestone M-SK saturated wipes have been specifically developed as a highly effective and cost efficient method to prepare surfaces while greatly reducing solvent emissions, solid waste and worker exposure to harsh chemicals. The SATWipes® consist of pre-impregnated tissues packaged in a convenient self-closing and reusable canister. The container design prevents the wipes from drying out and promotes a safer working environment. | |
| Cleaners (flushing Fluids) |
| Diestone E | | | |
| Diestone E is a solvent composition with a controlled volatility, used as a cleaning agent for removing aircraft type paint from paint lines and paint guns. It is free from halogenated hydrocarbons and is not classified as toxic, harmful or corrosive (decree of 02/21/1990, EC 88/379, 89/178, 90/35). It does not contain any teratogenic or carcinogenic components. | |
| Diestone G11 | | | |
| Diestone G11 is a water-dilutable with a controlled volatility, used as a cleaning agent. It is free from aromatic and halogenated hydrocarbons and is not classified as toxic or corrosive. It does not contain any teratogenic or carcinogenic components. | |
| HDL-500FF | | | |
| HDL- 500FF is a flushing liquid formulation for the removal of small debris, light oil, etc., into aircraft structures such as engines and full injectors. It can be applied by simple recirculation in a closed loop, filter and reused to provide clean surfaces. This environmentally acceptable product does not contain citrus terpenes, phosphates, or nitrates. | |
| Cleaners (Electrolytic) |
| HT-2004 | | | |
| HT-2004 is used for electro cleaning of iron, steel, stainless steel, brass and copper prior to electroplating. It has excellent oil emulsifying qualities as well as high electrical conductivity. | |
| Decarbonizers |
| HDL-340 | | | |
| HDL-340 is a heavy duty liquid de-carbonizer. It is intended for use where caustic based products and petroleum distillates cannot be used. It can also be used as a heavy duty aqueous degreaser. HDL-340 is a liquid with a slight cherry odour. It is a blend of polyoxygenated solvents, surfactants, and penetrants. | |
| Derusters and descalers (Alkaline) |
| Deox (additive) | | | |
| Deox is a liquid blend of organic sequestrants and water used as an additive to caustic alkaline solutions to improve rust removal, paint stripping and cleaning action. Deox is suitable for use in soak tank cleaning operations and power spray washing equipment. | |
| HDL-202 | | | |
| HDL-202 is a heavy-duty liquid alkaline, rust and scale remover. It is especially formulated for use in the removal of carbon deposits, complex metallic oxides and heat scale from hot sections of jet engines and to condition adherent scale for complete removal in subsequent processes such as scale oxidation in an alkaline permanganate bath and scale removal in an acid bath. | |
| HDP-2888 | | | |
| HDP-2888 is a heavy duty powdered alkaline, rust and scale remover. It is especially formulated for use in the removal of carbon deposits, complex metallic oxides and heat scale from hot sections of the jet engines and to condition adherent scale for complete removal in subsequent processes such as scale oxidation in an alkaline permanganate bath and scale removal in an acid bath. HDP-2888 is highly effective in removing metallic oxides and heat scale. It helps strip rust and paint in one operation. It can also be used for quick cleaning titanium. | |
| Derusters and descalers (Acidic) |
| AP-9186 | | | |
| A granular acid product used a part of a multi-stage process to assist in the removal of oxides and complex metallic heat scales from jet engine parts. It is approved for use on high strength or heat resistant alloys. It removes extremely tenacious heat scale and metallic oxides. | |
| AP-954 | | | |
| AP- 954 Is designed for the removal of rust from ferrous surfaces and oxides and heat scale from many jet engine components as part of the 4-step de-carbonizing process. | |
| AP-988 | | | |
| Ap-988 is a citric acid based descaler that is used to assist in the removal of oxides and complex metallic heat scale from jet engine components. | |
| Derusters and descalers (Neutral) |
| HDL-73 | | | |
| HDL-73 is a blend of complex neutralized organic acids specifically designed to dissolve metallic oxides. It is used in the cleaning of the hot section of gas turbine engine components and other similar parts. HDL-73 is the key component of our new innovative 3 step process in the removal of complex metallic oxides. | |
| Derusters and descalers (Permanganate) |
| HDL-2524 | | | |
| HDL-2524 is liquid sodium permanganate, provided in two components. The HDL-2524C is the liquid caustic component, while the HDL-2524P is the liquid permanganate component. One of the main reasons why the engine overhaul industry prefers using liquid permanganate is from a safety perspective. It is quite dangerous manipulating the caustic powder permanganate and the liquid provides a safer and more controllable environment without the risk of caustic fog harming the operators. | |
| HDP-2524 (Powder) | | | |
| HDP-2524 is used as a part of a multi-stage process to assist in the removal of oxides and complex metallic heat scales from jet engine parts. It is highly effective oxidizer of complex heat scales without corrosion to base metals (ferrous and high temperature alloys). Use of agitating equipment will generally enhance process results. | |
| Dewaxers |
| D-Solv | | | |
| D-Solv is part of an environmentally friendly process for the removal of wax after plating applications. D-Solv is an aqueous immersion process that is meant to replace traditional vapour degreasers and the use of trichloroethylene. It does not contain any carcinogenic ingredients nor does it contain chlorine, phenols, or hexavalent chrome. D-Solv is very stable at elevated temperatures and has an extensive operational life. It can hold up to 40% of its weight in wax. | |
| Kemsol-606 | | | |
| Kemsol 606 removes and floats masking wax to the surface of the solvent, where it is easily /automatically skimmed off to the MagChem Automatic Wax Collector. Kemsol 60 repels melted wax and is not contaminated by the wax. Long tank life reduces use cost. This product significantly helps aid the life of the second tank; D-Solv. | |
| Paint Strippers |
| Comorcap B.2 | | | |
| Comorcap B.2 is a Methylene Chloride exterior paint stripper especially suited for epoxy and polyurethane paints without corrosive action on metallic surfaces. | |
| Kemsol-556 | | | |
| Kemsol 556 is a blend of chlorinated solvents, cresols, penetrants, emulsifiers, and wetting agents. Its long tank life is low cost for use. It is an excellent carbon, paint and heavy duty degreaser. | |
| Kemstrip-596 | | | |
| Kemstrip 596 is a liquid stripper formulated to remove a wide variety of coatings such as phenolic acrylic and nitrocellulose lacquers, polyurethanes, and epoxies. These are the types of finishes commonly used on aircraft surfaces and engine components, such as impeller blades, transfer cases, diffuser cases, wheels and landing gear. Kemstrip- 596 can be used as a heavy-duty de-carbonizer. Floating oil seal retards evaporation which aids in the tanks long bath life. The product does not contain halogens, phenols, aromatic solvents, chromates, or heavy metals. Kemstrip 596 has shown excellent results in removing “rock hard” finishing. | |
| Socostrip A-0103N | | | |
| Socostrip A-0103N is a thickened water based emulsion paint stripper activated by hydrogen peroxide and used to remove top coats from aircraft surfaces such as epoxies and polyurethanes. | |
| Socostrip A-0212 | | | |
| Paint remover in acid medium intended for all paints, especially adapted to epoxy, polyurethane and alkyd urethane, non corrosive on metallic surfaces, steels, aluminium alloys, titanium, etc… | |
| Corrosion Inhibiting Compounds (CIC) |
| Corrotek | | | |
| Corrotek is liquid in-process rust preventive for use on steel parts. It provides rust protection and normally does not have to be removed prior to assembly of the protected parts. It can easily be removed by any aqueous method or even tap water. It is an excellent rust preventative for flash rusting. It will leave a dry film with no oily residue. It does not contain caustic, nitrite, or phosphate. It can be used in an immersion tank or sprayed on. | |
| Protectol ID | | | |
| Protectol ID is a solvent cutback indoor rust preventative that gives you up to year of indoor protection. It is a green liquid petroleum solvent containing rust inhibitors and special additives. The color additive helps in ridding water from your tank if being used as a dip. Once you see the colorant you know that all the water has been drained. Protectol ID completely displaces water and can be used cold. No heat is required. It is easily applied by dip, brush, or coarse spray. The thin transparent film does not interfere with visual inspection or reading of identifying marks. The film dries soft and will not wick or run. It will also expand and contract with the metal surface as to not crack. | |
| Socopac 25H | | | |
| SOCOPAC 25H provides a thorough protection and water-repellent coat for materials, spare parts or assemblies, in the worst climatic conditions. The ultimate film forms a very efficient barrier against all the agents responsible for corrosion (water, oxygen, acids, basis and salts coming from industrial emissions, tropical atmospheres, etc...). | |
| Socopac 50S | | | |
| SOCOPAC 50S provides a complete protection of materials, spare parts and assemblies in the most unfavourable climatic conditions. The film obtained forms a very efficient barrier against all the agents responsible for corrosion (water, oxygen, acids, basis and salts from industrial emissions, tropical atmospheres, etc.). | |
| Socopac 65H | | | |
| SOCOPAC 65H is very effective in reducing corrosion-linked maintenance costs; it gives excellent water-displacement and long lasting anticorrosion protection. This combination of properties helps to increase the life and reliability of materials, preserve structures and maintain the appearance and quality of new materials. | |
| Water displacement |
| Wadis 24 | | | |
| Wadis 24 displaces water and humidity giving to the treated surfaces water-repellent properties by adding a thin translucent, soft film with good anti-corrosive properties. Free from boron, silicone, barium. Its dielectric features are excellent. It can be used without any hazard on all switch gears and control gears, including high tension. Wadis 24 is also a releasing and lubricating agent. | |
| Wadis 634DM | | | |
| WADIS 634 DM is a water-displacing, lubricating fluid intended for all painted or unpainted metallic substrates and for electric motors or internal combustion engines exposed to humidity or corrosive atmospheres. | |
